[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Feedback



Sorry about sending to the LPD group, I at first thought it was a "help
line"  I do appericate the e-mails that you have sent me, however.   They
pointed me in the right direction and I got my modem working after figuring
out WTF I was doing.  If you would like I could type up a doc on it, but it
was not much really.  Just this:

Check what the modem is set to in Windows (COM3, IRQ5, 03E8)
At console:
pnpdump > /etc/isapnp.conf
ln -s /dev/ttyS2/dev/modem
setserial /dev/ttyS2
Console responds with:
"/dev/ttyS2 Port: COM3 UART: 16550A Port: 0x03e8 IRQ: 4"
setserial /dev/ttyS2 port 0x03e8 irq 5

Works like a charm except it is not sticky.  I have to do that every time I
restart... but someone said something about a rc.local file and that I had
to edit it.  Not sure where that is or what to put.. but I will find it.
I appericate your help, thank you very much.
Casey Cain.

----- Original Message -----
From: Rahul Joshi <jurahul@hotmail.com>
To: <wrathwolf@earthlink.net>
Sent: Wednesday, February 16, 2000 11:05 AM
Subject: Re: Feedback


> Hello Casey Cain,
>
>     I too have a Best Data Products internal PnP modem. Normally PnP
modems
> rarely work under Linux. I had to work for about 15 days to get it work
> under Linux. Don't worry, I will tell you what I have done. (You'll need
> Windows installed)
>
> 1. Tell the BIOS that you are not using a PnP OS from the CMOS setup.
>
> 2. Now start Windows and let it reconfigure. See the settings (IRQ) for
COM
> port to which the modem is connected from the System Properites.
>
> 3. Now start Linux. As the kernel boots, you should notice that it has
> detected three serial ports instead of the usual two. At this stage, you
may
> also need to reconfigure Linux, if you use RedHat 6.1.
>
> 4. Now set the IRQ of your modem port (probably /dev/ttyS2) to that set up
> in Windows. For eg. if it was 10 then give the command
>
> # setserial /dev/ttyS2 irq 10
>
> 5. Now see if the modem can be detected by using the command "wvdialconf".
> If it finds a modem on one of the ports, it will inform you.
>
> For more information, refer to the Modem-HOWTO, PnP-HOWTO and other
related
> documents at the LDP site http://www.linuxdoc.org
>
> In case the above info. was useful to setup your modem please send a mail
to
> me.
>
> Well, to be strict, you will not get any such technical information about
> Linux from this discussion list.(The HOWTO's are there for that). But I
just
> decided to reply to this one.
>
> >I have a ISA modem; Motorola VoiceSURFR 56K Internal PnP... and well
> >simply put, I am having some difficulty getting it setup.  I have tried
(I
> >think) every COM port (if that is what that /dev/ttyS0 and other listings
> >in KPPP Setup under the KDE desktop are) and all I seem to get for a
> >response is "Modem is Busy" or "Sorry, the modem did not respond."
>
> >Thank you very much,
> >Casey Cain
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>


--  
To UNSUBSCRIBE, email to ldp-discuss-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org